XTOOL A80 Pro OE-Level Full System Diagnosis Tool with IMMO/ECU Coding/Special Function Compatible with KC501/KS-1/KC100

XTOOL A80 Pro OE-Level Full System Diagnosis Tool with IMMO/ECU Coding/Special Function Compatible with KC501/KS-1/KC100

Xtool A80 Pro is a OE-Level full system diagnostic tool with 8.0-inch industrial capacitive touch screen.A80 Pro also Adding DC / Type-C / VGA data transfer ports, it makes data transfer and image mapping more convenient and faster.A80 Pro is with ECU coding function makes work easier and helpful and the tablet is with 2G RAM and 64G on-board memory.

Features:

• Key programming
• All System Diagnostic
• EEPROM Adapter
• Odometer Adjustment
• Electric Parking Brake
• Steering angle sensor adjustment
• DPF
• Service/Maintenance Light
• Cylinder
• Air Suspension
• PIN Code Reading, VIN Code Auto Recognition
• Headlight
• Tire Pressure Reset
• Throttle Relearn
• Support the latest vehicles with CAN BUS ,UDS Protocol and DOIP Protocol
• Update Via WIFI (always equip your device with the latest software)
• Multilingual

Xtool A80 Pro OE-Level Diagnose Function

As an OE level automotive diagnostic tool, XTOOL A80Pro can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information and perform active tests, matching, adaptation, turn off warning lights, reset monitors. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.

• Include: ABS System, Engine System, SAS System , TPMS System , IMMO System , Battery System, Oil Service System, SRS System, DPF System, Air Conditioning System, Transmission System, etc.
• Read Codes– displays detailed information of DTC records retrieved from the vehicle control module.
• Erase Codes– erases DTC records and other data from the ECM.
• Retrieve Live Data in text or graph like misfire data, engine rpm, transmission oil temperature, mass air flow sensor data, cylinder balance rates, fuel pressure, actual fuel temperature vs desired fuel temperature and etc.
• Retrieve Freeze Frame from the ECUs to show the parameters when a DTC is recorded.
• Retrieve ECU information of unit type, version number, and other specifications and etc.

A80 Pro ECU Programming Online/offline Program, Coding

Xtool A80 Pro comes with ECU programming device that Works For VW,BMW,BENZ,FORD,MAZDA,AUDI ECU Programmer

A80 Pro with 30+ kinds of Special Functions

• Oil Reset: Close the oil service light and reset service mileage & service interval after replacing the engine oil.
• Throttle Relearn: Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.
• ABS Bleeding: Get a firm brake pad after air exhaustion.
• Key Programming/Immobilizer: Allows to disable a lost vehicle key to protect the vehicle from being stolen and add the new key.
• Electronic Parking Brake Reset: Reset the new electronic parking brake for braking wheels safely again.
• DPF Regeneration: Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.
• Injector Coding: Allows to write a new code to the ECU for accurate communication and Injection control. After the ECU or injector is replaced, the cylinder can better identify injectors to accurately control fuel injection.
• SAS Calibration: Allow to clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.
• Tire Pressure Monitor System Reset: Relearn TPMS sensors so that new sensors can be recognized by ECU.
• BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.
• Gearbox Match: Matching the gearbox/transmission after replacement.
• DIY Mode: Programmer Car models Hidden functions (High configuration hidden function) And Windows Calibration, Seats Calibration.

Other special functions include Headlight Adjustment, Airbag Reset, Tire Reset, Language Change, Suspension Calibration, ABS Initialization, Seat Calibrations, Transport Mode, Tire Upgrade, Tooth Learning, A/F Reset, Coolant Bleed, Transport Mode and etc.

Active Test (Bi-Directional Control)

XTOOL A80Pro comes with Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators, like EVAP test, Cylinder Deactivation, Cycling A/C Clutch On/Off, switch fuel injector on/off, cycling ABS motor pump, test car window, door, sunroof, wipers and etc to pinpoint fault locations easily and effectively.

Xtool A80 Pro Vehicle Coverage

The software of A80 PRO has a wide range of compatibility and can be used to diagnose vehicles from over 100 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service.

Xtool A80 Pro OBDII Diagnosis

VIN Code Auto Recognition

Xtool A80 Interface and Product Details

Xtool A80 Pro Package List

• 1xA80 Pro Interface
• 1xA80 Pro VCI+
• 1xOBDII-16
• 1xFiat-3 Adapter
• 1xToyota-17 Adapter
• 1xHonda-3 Adapter
• 1xKia-20 Adapter
• 1xQingLing-3 Adapter
• 1xKia/Hyundai-10 Adapter
• 1xBMW-10 Adapter
• 1xOBDII-USB Cable
• 1xBMW Cable
• 1xBenz-38 Cable
• 1xMitsubishi 12+16 Adapter
• 1xMain Cable
• 1xUniversal-3 Cable
• 1xHaiMa-17+2 Cable
• 1xBattery Cable
• 1xUSB Cable
• 1xCigar Lighter Cable
• 1xCharger Cable
• 1xPower Cable US

Download:

• XTOOL A80 Pro User Manual
• XTOOL A80 Pro Instruments Cluster Function V30.20