Xhorse MB Token Unlimited Pack for VVDI MB Tool - 1 Year

Xhorse MB Token Unlimited Pack for VVDI MB Tool - 1 Year

Description:

• One year duration.
• Yearly Subscription Activation Free Token.

This is a digital product, no shipping is needed. We just need the serial number for the VVDI MB BGA device, and we can add the tokens online.

*If your one year unlimited tokens is not expire, you can still buy tokens again. It will start from the time when it expires.

• As many tokens as you can use everyday day ! No limitation!
• The unlimited token is for VVDI MB only. Key Tool Plus does not have unlimited token policy.

VVDI MB Tool Tokens

• Password calculation can get key password through EIS and working key (online)
• CAN protocol EIS all support password calculation
• Support BGA keys and other NEC keys
• Support calculate password for NEC v51, v57 keys. No soldering, safe method.
• Data acquisition time depends on the key version. It needs about 3.5 - 13 minutes
• BGA version need about 5 minutes, some versions only need 3.5 minutes
• Calculate time in server: 30 seconds – 1 minute

How to Check the MB BGA tokens?

• If you have condor mini/dolphin key cutting machine, after you bind condor with VVDI MB Tool,it will display free token.
• If you purchase the tokens,after we inform tokens are OK, you can see payed tokens times.

Support:

The application list below is for models that require a token to read the password:

• W164
• W166 
• W197
• W212
• W218 
• W246
• W169
• W209
• W211
• W172
• W204
• W207
• W216
• W221
• W639 2009-

Functions:

Mode: OBD and IR adaptor, mode use for communicate with EIS

Chassis: Select chassis number, you can detect it with auto detect in EIS Tools

Data Acquisition: Press“Data Acquisition”, it will continue with following steps automatically

• Insert working key to ignition, waiting 15 seconds
• Insert working key to device IR reader, verify key and car
• Data acquisition
• Insert working key to ignition, waiting 30 seconds
• Insert working key to device IR reader, wait end...
• Save acquisition data

Upload Data: Upload saved acquisition data to server for calculate password.

Attention:Once success calculate password for one SSID, the server will not accept calculate the acquisition data with same SSID in 2 hours. After 2 hours, acquisition data with same SSID upload to server will start with a new task

Query result: Query server calculation result. The password will fill in key password area automatically after success calculation. Use “Copy” copy password to clipboard

Auto reflash: Program will auto re-flash server result until there’s no task for this device.You can start data acquisition once more while auto reflash starting

Stop acquisite after success: If you are run data acquisition while auto reflash running,program will stop the acquisition progress when find correct password

About query result status:

• Queuing: number x, require about y minutes, means your task need y minutes
• Processing: requires 1 minutes, means your task need 1 minute to finish
• Password: xxxxxxxxxxxxxxxx (Free), means success find password, "Free" show this task is calculated for free or this task already success calculated before
• Discard: Once you success calculate the password, in 2 hours, the upload acquisition data with same SSID will discard
• Already upload: means the server already have this file in queuing
• Pay for password calculation before upload: means your device doesn't have authorize for calculation. Contact your dealer and pay for password calculation
• Failed: means this task failed to get password, you can run data acquisition again.Failed task is always free