AKS KEYS Garage Door Opener Remote for Genie Intellicode G1T-BX / GIT-1 / GIT-2 / GIT-3

AKS KEYS Garage Door Opener Remote for Genie Intellicode G1T-BX / GIT-1 / GIT-2 / GIT-3

This Genie 1-Button remote is simple and easy to use. If you need a Genie replacement remote to operate one garage door, this is the perfect remote for you. This Genie garage door opener remote also features Auto-Seek Dual Frequency (315/390 MHz) leading to less operation interference. This new style 1-Button Intellicode remote replaces the discontinued ACSCTG Type 1 Intellicode® remote.

Feature:

• Compatible with all Intellicode® equipped Genie openers (compatibility chart)
• Sleek compact design is perfect to add to a keychain or clip to your visor (Visor clip is included)
• G1T-BX Uses one 3 Volt (CR2032) battery that is also included
• Simple Programming: DIY detailed illustrated programming instructions are included for quick and easy setup, which makes this a great replacement remote

Programming Instructions:

A. For use with Learn Code Button equipped Openers (1995 to Present) —

• Remove the battery’s protective film by pulling it out the bottom of the remote.
• Locate the Learn Code Button and Learn Code Indicator LED on your opener’s powerhead Fig. 1A below (See your owner’s manual).
• Press and release the Learn Code Button—the Red Learn Code LED will blink rapidly.
• Press and release the G1T-BX Remote Button, —the Learn Code LED will stay on (stops blinking).
• Press and release the Remote Button again—the Learn Code LED will turn off.
• Press and release the Remote Button again—the Door Opener will run.

THE G1T-BX REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.

B. For use with Program/Set Button equipped Openers (2010 to Present)—

• Remove the battery’s protective ­film by pulling it out the bottom of the remote.
• Locate the Program/Set Button and Programming Indicator LEDs on your opener’s powerhead Fig. 1B below (See your owner’s manual).
• Press the Program/Set button until the round LED will turn blue.
• Release the Program/Set button—the long LED will blink purple.
• Press and release the Remote Button, —the long LED will turn steady purple (stops blinking).
• Press and release the Remote Button again—both LEDs will blink blue and turn off.
• Press and release the remote button again—the Door Opener will run.

THE REMOTE IS NOW PROGRAMMED. Repeat as necessary for additional remotes.

Use these instructions if you are using this 1-Button garage door opener remote as a Genie replacement remote, or adding as an extra garage door opener remote to use with existing ones.

Downloads:

• Genie G1T-BX Instraction

This is NOT a universal remote. It is compatible only with Genie garage door operator (hanging in your garage). Please verify before purchasing.